---

Solved: How to enable compliance test in Ubiquiti ac radios

Article by: charles
Last Modified: 2024-11-19 22:13:19

The following are quick steps to configure compliance test on AC devices of Ubiquiti

Steps to configure compliance test on AC devices of ubiquiti

To enable compliance test in ubiquiti ac equipment, follow these steps:

1. Download and install Ubiquiti airmax® ac toolkit
2. Launch the software. In case of errors to do with Lato font, follows these steps to fix it.
3. Enter the ip address of the required and supported AC equipment and connect to it.
   
4. Chose the currently installed firmware from the drop-down list and click  "Accept" to agree to terms and conditions
   
5. Click "Activate". The device will reboot and come up with compliance test as the regulatory domain.
6. Remember to revert back to your country setting after testing.

Enjoy !

---

---

Related Links: Solution: Memory Access violation in Tally - c0000005 (Software Exception 0xC0000005) Error in TDL: Insufficient Height to Allocate! Solution for Tally Manager.900 Error Fix: Brother J870DW Absorber Full How to fix Tally Error Code 2147483650 How to protect your phone from being hacked Solved: Reset Linksys WRT120N to Default Settings Step by Step: Change IP Address in Windows 7 How to enable compliance test in Ubiquiti AC radios How to install windows 10 in Celeron J1900 computing-tips.net - Computing tips, find tips on computing and technology